Decibullz Awareness Radio Earpieces Instructions and VideoUpdated 2 months ago
Decibullz Awareness Radio Earpieces Instructions PDF
Decibullz +Awareness Custom Molded Surveillance Earpieces
Instruction Manual
Model: RDO-AWA
Release: September 2022
WARNING
Improper fitting or misuse will reduce effectiveness and may result in hearing loss or injury.
Do not place hot molds into your ear. Wait until they are warm and pliable.
Test the product thoroughly before full-time use.
The +Awareness Back Plug is not hearing protection by itself.
Remove ear piercings before molding.
Check that silicone tips are securely attached before every use.
Remove earpieces slowly to avoid eardrum damage.
If the tip becomes dislodged in the ear canal, seek medical attention.
Do not use with drainage or a perforated eardrum unless advised by a physician.
Keep parts away from children and pets (choking hazard).
What’s Included
Left and Right EZ Shape Custom Molds
+Awareness Back Plug (1)
Silicone Tips (S/M/L Triple Flange and S/M/L Single Flange)
Drawstring Pouch
Materials Needed (Not Included)
1–2 Ceramic or Glass Cups
Kettle or Microwave (for boiling water)
Boiling Water
Timer
Metal Spoon
Mirror (recommended)
Molding Instructions
Step 1: Review the Printed Instructions and video.
Step 2: Prepare
Attach a small silicone tip (single or triple flange) to the mold.
Ensure the tip is securely attached by gently pulling.
Tip style notes: triple flange = more secure; single flange = more comfort.
Step 3: Heat Water
Microwave: Boil 3–4 inches of water in two ceramic or glass cups.
Kettle: Boil water and pour 3–4 inches into each cup.
Do not microwave molds.
Do not use paper, plastic, or Styrofoam cups.
Step 4: Soften the Mold
Place one mold per cup.
Let sit in hot water for 5 minutes.
Remove mold with metal spoon and let cool for 30 seconds.
Caution: Items may be hot.
Step 5: Insert +Awareness Back Plug
Insert the +Awareness Back Plug into the mold.
Step 6: Insert Earpiece
Insert the mold into your ear, aligning the tip with the canal.
Firmly press on the +Awareness Back Plug to seat the mold securely.
Step 7: Shape
Press and smooth the mold into the concha (bowl) of your ear using your fingertip.
Avoid using fingernails for shaping.
Step 8: Cure
Leave the earpiece in your ear for 5 minutes.
Press the +Awareness Back Plug every 30 seconds to improve seal.
Step 9: Remove
Remove the earpiece and allow it to cool.
Insert your clear acoustic tube (not included) into the +Awareness Back Plug.
Step 10: Repeat for Second Ear
Repeat Steps 4–9 with the second mold and Back Plug (if applicable).
Fit and Molding Tips
Each ear may require a different tip size or style.
Start with a smaller tip to simplify molding.
Reheat molds if the center is still firm or uncomfortable.
Angle the earpiece slightly forward to align with the canal.
If uncomfortable after molding, remold by removing the Back Plug and repeating the heating process.
Decibullz molds can be remolded as many times as needed.
Cleaning Instructions
Remove the Back Plug before cleaning.
Wash components (except foam tips, if used) with mild soap and warm water.
Rinse thoroughly and dry completely.
Inspect for wear or damage before each use.
Additional Warnings
Do not leave in direct sunlight or high heat (above 120°F / 49°C).
Not a toy — avoid risk of strangulation or choking with cords or small parts.
Only use as directed. Improper use may result in injury.
Satisfaction Guarantee
If you're not satisfied with your experience, contact our support team.